Installation instruction for adapter

Discussion about ITT Night Vision Products

Moderator: Michael

Installation instruction for adapter

Postby Matsuda » Mon Jun 28, 2010 7:42 pm

Would you instruct how adapter(P/N: 273256) and Filter(P/N: 272973) can be attached AVS-9??
No information is found on the web. Please help. :cry:
Matsuda
 
Posts: 41
Joined: Fri Jun 11, 2010 1:45 am

Re: Installation instruction for adapter

Postby Dino1130 » Tue Jun 29, 2010 6:55 pm

Just tell me what you want to adapt to your AVS-9 and I will help you. I don't have the patience to look up part numbers. :D
I said I never had much use for one. Never said I didn’t know how to use it.
Dino1130
 
Posts: 1300
Joined: Fri Mar 31, 2006 8:38 pm
Location: USA

Re: Installation instruction for adapter

Postby Matsuda » Wed Jun 30, 2010 1:14 am

Dear Dino1130,

Thank you for your help.
I would like to adapt the below filter to AVS-9.
http://www.asu-nvg.com/Products/F4949_Replacement_Parts/?PageIndex=5&ProductID=66

And I have a snap-on adapter to install the filter to AVS-9.
This information help you??



FYI; The below adapter is not what I have. This is glue-type adapter.
http://www.asu-nvg.com/Products/F4949_Replacement_Parts/?PageIndex=5&ProductID=67


Matsuda.
Matsuda
 
Posts: 41
Joined: Fri Jun 11, 2010 1:45 am

Re: Installation instruction for adapter

Postby Dino1130 » Wed Jun 30, 2010 3:10 am

Yep,what I thought. You epoxy (superglue etc...) the ring to your objective lens. This allows you to screw in the LIF,Sac lens and so on. First off, there is no way in hell I am gluing anything to the front of my high dollar AVS-9 (just me ). The solution is to get two 3x afocal adapters for a Mum. They are friction fit and will go on very snug over your AVS-9 objectives. No glue needed and it works great. You can then also use your AVS-9 as a pair of 3x binocs with a couple 3x afocal lenses. :D

http://www.opticshq.com/Merchant2/merch ... ing-Scopes


Tip : Use a tiny bit of silicone grease to help get the adapter on as it is a very snug fit. Also helps with removal . The objectives on the AVS-9 are to close together to use the afocals with the lens cap ring. You must remove the lens caps . They just snap on and off. Very easy.
I said I never had much use for one. Never said I didn’t know how to use it.
Dino1130
 
Posts: 1300
Joined: Fri Mar 31, 2006 8:38 pm
Location: USA

Re: Installation instruction for adapter

Postby Matsuda » Tue Jul 06, 2010 10:46 pm

Thanks for your info. Do you have any information about a snap-on adapter to install the filter to AVS-9?

Matsuda
Matsuda
 
Posts: 41
Joined: Fri Jun 11, 2010 1:45 am


Return to ITT Night Vision

Who is online

Users browsing this forum: No registered users and 1 guest