Gen2 NVG issue

Discussion about Night Vision Goggles and Night Vision Binoculars / Monoculars

Moderator: Michael

Gen2 NVG issue

Postby rockafellas » Wed Mar 02, 2016 10:33 am

Hey guys, I have a friend who picked up a set of PS1 MS MkII gen 2 NVG's; they are a great little unit and even has ABC functionality built in. I had a pair myself and they worked great.

Anyway my question is, my friend bought it they were working fine then after a few days the image started flickering until it finally went almost completely black. Think this is an issue with bad potting, blown tubes or something else? Also any ideas where one might get this devices serviced/repaired?

Thanks in advance.
rockafellas
 
Posts: 12
Joined: Wed Feb 24, 2016 9:51 am

Re: Gen2 NVG issue

Postby wellyot » Wed Mar 02, 2016 12:57 pm

if both tubes started flickering then its most likley not the actual tubes but from the battery thru switch and to the tubes - somewhere a bad contact or joint unless he was very unlucky and both tubes failed at the same time
wellyot
 
Posts: 168
Joined: Tue Dec 12, 2006 1:59 am


Return to Goggles & Binoculars

Who is online

Users browsing this forum: No registered users and 1 guest